Advertising engraving machine pump installation and software installation?

1. Advertising engraving machine pump installation:

Prepare a small bucket of water, take the water pump out of the box, insert the water nozzle into the water pump outlet, engrave the machine, take two water pipes and take one. Insert the tube into the water pump nozzle and put it into the equipped bucket. The cooling water should be Use pure water without impurities and ensure normal circulation of circulating water.

2, advertising engraving machine software installation: here said the advertising engraving machine software installation, of course, refers to the installation of the control system.

(1) Open the ncstudio5.4.49 folder and double-click the installer Setup.exe to start the installation. Follow the prompts until the end of the installation.

(2) Turn off the computer, open the computer cover, insert the control card into the PCI slot, and connect the computer to the machine with the white data cable. (Note that the connection data cable is, the machine power must be turned off, the computer must be turned off when the control card is plugged and unplugged).

(3) Re-open the computer, wait for the driver prompt window to click Install (you can select the installation directory as needed).

(4) After the installation is complete, open the control software ncstudio5.4.49.

The advertising engraving machine software failed after installation?

If you double-click the ncstudio5.4.49 software icon to open the software, the window prompts 'Hardware installation failed', please do something. (My computer - attribute - hardware - device manager - CNC adapter network and computer encryption and decryption controller (see if there is a yellow exclamation point in this place, if there is a lack of drivers need to do some operations) update the driver --- Automatically install the software---Next step until the driver installation is successful. (The yellow exclamation mark will disappear automatically after the driver installation is successful).

Advertising engraving machine Wentai software installation?

First insert the random software CD into the computer CD-ROM drive. After entering the CD-ROM, find the “Wentai Carving 2004 Edition” folder and double-click to open the folder.

Double-click the "Setup" installation file with the computer icon. The default installation language of the software is "Simplified Chinese", click "OK" to start the installation program;

Click "Next",

Click "Yes" to pop up the "Select Target Location" window. If you click "Next" directly, the software is installed under the C drive root. According to the actual situation, we recommend that you do not install it under the C drive. First click "Browse" next to it, change the installation path to "D:/Artcut6", and install the engraving software in the "artcut6" folder of the D drive (of course, you can load the software into the E drive according to the actual... ), click "OK" to return, then click "Next" to pop up the "Setting Type" window, then select the "Maximum Installation" option, click "Next"; click "Next" again to start the software The installation process, when the progress bar shows 100%, the software installation is complete.

After the installation of the advertising engraving machine Wentai software?

In order to make the engraving work go smoothly, some necessary settings must be made after starting the “Wentai Engraving Software”.

1. Identification of engraving tools and establishment of tool magazines. Please refer to the related content below.

2. Click "Cut" to pop up the "Cutting Words" window and make sure they are correctly set as follows: Tool Compensation 3D Path

3. Click the “G” icon (on the right side of “Carving”) to pop up the “Save the text into the text file” window (we will use the output to the DSP control software in the future.)

(1) Select from "Profile List": Standard G Code

(2) Lifting knife distance: According to the engraving material and cutting method, it will be discussed later.

(3) Click "Settings", then click "Configure Origin and Coordinates", the content settings are as follows:

Origin position: 1 horizontal direction: XZ axial down: negative.

How to maintain the advertising engraving machine pump?

1. The continuous operation time of the advertising engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high.

2, the cutting spindle, the two are mutual, it is necessary to often change the circulating water to the engraving machine, keep the water and water temperature to block the water pump outlet or the water-cooled cutting spindle runs at high temperature to cause component damage.

Read the above explanation, whether it is a pump or software, everyone should install it? It doesn't matter if the advertising engraving machine pump and software are not installed. General manufacturers will have professional staff to help you install and debug. If you don't understand anything, you must consult in time. Of course, if the staff has left after the installation, there are other problems, you can consult the factory.