The safe operation of the woodworking engraving machine begins with the details:
1. Workers must wear protective clothing before going to work. Female workers must wear a work cap or hair net. They are not allowed to wear a scarf.
Don't wear gloves, don't smoke, don't talk to others, focus on energy.
It is strictly forbidden to play and fight in the workshop.
2. Before starting the machine, it is necessary to check that the lubrication and protection of all parts of the machine meet the requirements.
3. Choose tools and fixtures reasonably.
When clamping precision workpieces or thinner and softer workpieces, the clamping method should be appropriate and the proper biting force should be applied to ensure that the clamping is firm and reliable. Do not tap hard, tap gently with a wooden hammer or pad.
4 During the operation, observe whether the workpiece clamping is loose at any time. If it is loose, stop immediately to prevent injury.
The workstation location should be appropriate when observing the workpiece during operation.
5. When the engraving machine moves quickly, pay attention to the surrounding environment to prevent collision.
6. If the motor of the CNC engraving machine is abnormally hot and the sound is abnormal, stop the engraving machine immediately.
7 Operation should be civilized, do not arbitrarily prevent tools, instruments and workpieces and workbench on the machine rail.
When the CNC engraving machine woodworking engraving machine is running, it is forbidden to touch the rotating parts, and do not tilt the body.
It is not allowed to transfer items from above the machine running parts.
8 Obey the technical regulations, do not arbitrarily modify the manufacturer's setting parameters and operating procedures in the CNC system.
9. After the operation is complete, wipe the machine, clean the job site, and disconnect the power.
