The rust of the woodworking engraving machine spindle is a problem that plagues many users. Because of the working environment, if the maintenance is not timely, the spindle motor is easy to rust, and slight rust does not affect the normal use of the spindle motor, but if it is not handled for a long time, the life of the spindle motor will be shortened. Woodworking engraving machine spindle motor rust removal method:
First, by hand knocking, shovel, scraping, brushing, sand or flexible frustration to eliminate the appearance of scale, scale, etc., this is the painter radical derusting method, you can also use a blade, scraper, pointed hammer, wire brush , abrasive cloth, broken saw blade and other tools, this method is relatively simple, but it is also easy to damage the machine. Maintenance personnel need to be very careful when removing rust. It is easy to cause the machine spindle to deviate from the track without paying attention.
Second, use a clean lubricant, evenly sprayed on the motor, about half an hour you can use a cotton cloth to wipe off the rust on the stone engraving machine, if the rust is severe, you can spray a few times more lubricant. Lubricating cleaners are non-conductive and have good lubrication.
